I print with several Bambu Lab P1P 3D printers. They use something called Core XY printing, which increases the printing speed a bit. The PLA filament I am using is not the cheapest I can find on the market to cut down on the costs. I use Bambu Labs own PLA filament, which is designed for the printer and has very good preset settings for their own filaments. I do not want to skip on the quality in favour for profit. That is not my goal.

The printer is using a 0,4mm nozzle with 0,12mm layer height for terrain. I do have the possibility to use a 0,2mm nozzle as well and can make the layer heights as low as 0,06mm. Bare in mind though, this increases the printing time simnifically, and I reserve this option for special prints by request. Layer height to a larger one can also be requested, to lower the printing time and therefor also the total cost. Note that the quality drops of course with increased layer height. 

The filament used is Grey, and other colors are possible on request. But will take some additional time if I need to order that specific color. 

There are two ways of ordering prints. Some terrain pieces I will be licenced to sell with a merchants license. The other way is to rent my printers. I'll of course operate them so no moving is needed. But you need to own the print file you want to be printed. Proof of purchase is needed, and I am not allowed to re-print/re-sell these files to anyone else. 

I am also available in some cases to paint the printed terrain for a commission fee. Terrain is something I have a huge passion for, and have been building and painting for many years now. With that said, I will not skip on quality. I do these print jobs because I have a passion for wargaming and terrain. And as a wargamer my self, I have an understanding of the imprtance of good terrain, both for tournaments and narrative play.